Consolidated technical documentation including material specifications, performance ratings, dB attenuation charts, lead-equivalency tables, and frequency response data.
Our RF shielding systems provide consistent ≥40 dB attenuation across the full electromagnetic spectrum. Performance data by frequency band.
| Frequency Band | Wavelength | Min. Attenuation | Visual | Applications |
|---|---|---|---|---|
|
10 kHz - 300 kHz
VLF / LF
|
30 km - 1 km | ≥50 dB |
|
Power lines, radio navigation |
|
300 kHz - 3 MHz
MF / HF
|
1 km - 100 m | ≥48 dB |
|
AM radio, RFID, NFC |
|
3 MHz - 30 MHz
HF / VHF Low
|
100 m - 10 m | ≥45 dB |
|
Shortwave, amateur radio |
|
30 MHz - 300 MHz
VHF
|
10 m - 1 m | ≥44 dB |
|
FM radio, TV, air traffic |
|
300 MHz - 3 GHz
UHF
|
1 m - 10 cm | ≥42 dB |
|
Cellular, WiFi, Bluetooth, GPS |
|
3 GHz - 30 GHz
SHF
|
10 cm - 1 cm | ≥42 dB |
|
Microwave, satellite, radar |
|
30 GHz - 40 GHz
EHF
|
1 cm - 7.5 mm | ≥40 dB |
|
Military comms, mmWave 5G |
Note: All attenuation values measured per IEEE Std 299-2006. Testing performed by NSA-approved laboratory.
Our proprietary shielding materials deliver superior performance across all frequency ranges. Technical specifications for each material system.
Our proprietary shielding wallcovering systems provide equivalent X-ray and gamma radiation protection. Lead-equivalency ratings for various configurations.
| Configuration | Layers | Thickness | Lead Equiv. | Weight | Typical Application |
|---|---|---|---|---|---|
| Standard Wallcovering | 2 layers | 0.8 mm | 0.5 mm Pb | 4.2 kg/m² | Dental facilities, veterinary |
| Standard Plus | 3 layers | 1.2 mm | 0.8 mm Pb | 6.3 kg/m² | General radiology |
| Heavy Duty | 4 layers | 1.6 mm | 1.0 mm Pb | 8.4 kg/m² | CT scanners, mammography |
| High Performance | 5 layers | 2.0 mm | 1.5 mm Pb | 10.5 kg/m² | Nuclear medicine, cath labs |
| Maximum Shielding | 7 layers | 2.8 mm | 2.0 mm Pb | 14.7 kg/m² | Radiation therapy bunkers |
Total System: 110-195 μm (0.11-0.20 mm) applied coating thickness
Graphical representation of shielding performance across the electromagnetic spectrum. Our systems maintain consistent attenuation from VLF through EHF frequencies.
Our shielding products and installation practices meet or exceed all relevant international standards and government requirements.
National Security Agency
Testing and certification of electromagnetic shielding materials for government facilities.
Institute of Electrical and Electronics Engineers
Standard method for measuring the effectiveness of electromagnetic shielding enclosures.
U.S. Department of Defense
Requirements for the control of electromagnetic interference emissions and susceptibility.
Quality Management
International standard for quality management systems ensuring consistent quality.
Intelligence Community Directives
Physical security standards for Sensitive Compartmented Information Facilities.
National Institute of Standards
Security and privacy controls for federal information systems and organizations.
Register your facility for a comprehensive shielding assessment. Complete the form below and our team will analyze your requirements.
Our engineering team can provide custom specifications for your specific project requirements. Contact us for tailored shielding solutions.
Material specifications
Technical deep dives
Expert engineering team
